基于电锅炉的火电机组灵活性改造技术研究

为有效解决东北电力产能过剩,促进风电、核电等清洁能源消纳问题,提升燃煤供热机组的灵活性,针对东北地区某热电厂,通过对热电解耦时间、电锅炉型式以及不同电锅炉容量配置对机组实际发电负荷的影响等灵活性改造关键技术进行研究,确定了最佳电锅炉容量,提出了电锅炉装设方案,并对改造前后机组的调峰能力和性能指标进行对比分析。研究表明:随着电锅炉容量增长,抵减电锅炉用电后机组实际发电负荷率显著降低,提升火电机组灵活性改造后,电厂调峰能力显著提升,考虑以全厂172 MW发电负荷运行,电厂调峰能力在采暖初末期增加了368 MW,采暖中期增加了528 MW;全厂供热标煤耗由39.7 kg/GJ降低至34.3 kg/GJ,降低了5.4 kg/GJ;经济效益显著,扣除电锅炉用电成本后1个采暖季的调峰辅助服务补贴收益为1.47亿元;同时,电锅炉投运后可实现电厂的上网电量接近零,为清洁能源就地消纳做出贡献。     

Effects of particle fouling and magnetic field on porous fin for improved cooling of consumer electronics

The combined effect of particulate fouling and magnetic field on the efficiency of a convective–radiative porous fin heatsink with temperature‐dependent thermal conductivity is presented. The developed thermal models are solved using differential transformation method. The effects of thermal conductivity, porosity, convection, radiation parameter, and thermal fouling number on the fin thermal efficiency are investigated. The presence of thermal fouling on the surface of the fin is shown to increase the temperature distribution. The presence of particle deposition on the fin surface significantly decreases the rate of heat transfer as additional thermal resistance of the fouling layer decreases the thermal performance of porous fin heatsink. Moreover, the fin efficiency decreases as the value of fouled Biot, Darcy, radiation number, and thermogeometric parameter increases. It is established that M_f < M_c, which indicates that the efficiency of the fouled fin is greater than the efficiency of the clean fin. Furthermore, the result of the present study is validated with the established results of Chebyshev spectral collocation method and fourth‐order Runge–Kutta with shooting method and an error margin of 0.000000023 is established.     

Hydrothermal Carbonization of Sewage Sludge: Analysis of Process Severity and Solid Content

Hydrothermal carbonization of sewage sludge was carried out with the aim to evaluate the influence of process severity and initial solid content. Response surface methodology was applied to model yield and C yield responses. Enhanced dewaterability performance was recorded under mild processing conditions. The treatment promoted concentration and immobilization of Pb, Cd, Ni, Zn, and Cu. Variation of the solid content showed a stronger influence than severity on average yield and C yield. Higher heating values (HHVs) and energy retention efficiencies (EREs) of hydrochars obtained at the lowest solid content displayed the lowest values. Hence, the energy requirements of a first dewatering step should be compared with the related improvement in terms of HHV and ERE when sludge is used as feedstock.     

Hydrothermally grown uniform TiO2 coatings on ZrO2 fibers and their infrared reflective and thermal conductive properties

Improving the infrared reflectivity of ZrO₂ polycrystalline fibers is of great benefit to its thermal applications. In the present research, we cast a highly uniform TiO₂ coating with a thickness ranging from dozens to hundreds of nanometers on ZrO₂ fibers by utilizing hydrothermal growth. The coating bonds tightly to the ZrO₂ fibers via Zr–O–Ti chemical linkages, and the thickness of the coating can be tailored by varying the hydrothermal growth time. The TiO₂ coating, acting as a sheath towards electromagnetic radiation, not only reflected light with wavelengths ranging from the visible region to the infrared region and up to 8 μm but also shielded the Raman signals of the ZrO₂ fibers. The present research provides an efficient way to cast controllable and uniform coatings on flexible fiber materials. The obtained ZrO₂ fibers coated with TiO₂ may have applications such as reinforcement for bulk ceramics, thermal barrier coatings, aerogels, etc., thus performing the dual functions of mechanical strengthening and thermal insulation.     

煤磨热风管道改造的效果

中联万基水泥有限公司4500t/d熟料生产线采用SCLW4-12×13.4第四代篦冷机,煤磨热风取风口和余热发电AQC热风取风口在篦冷机同一对称位置,煤磨与余热发电系统存在争风现象,开停煤磨对余热发电系统影响较大。通过从废气管道处开孔,加装管道和电动阀,与热风管道汇合通往煤磨沉降室,调整相应阀门开度,可以控制入煤磨烟气温度,这样不但提高了余热发电量,而且提高了煤磨产量,同时也降低了窑头排风机的负荷,降低了熟料生产电耗。     

地勘单位转制后税务风险识别与控制

结合“减税降费”的政策背景,以陕西省某转制地勘单位为例,引入风险控制相关理论并应用层次分析法,构建了税务风险评估指标体系,对转制地勘单位面临的税务风险进行了识别、分析、评估。研究结果表明:针对不同的税收类型,应着重关注不同方面的风险,排序前6位的风险依次为企业所得税扣除类风险、增值税决策环节风险、增值税销售环节风险、房产税计税依据风险、企业所得税税收优惠类风险、增值税采购环节风险;并对上述风险的控制机制进行了分析,从企业管控、政策优化两方面分别提出了相关对策和建议。     

Development of Core-Shell Nanoparticle Drug Delivery Systems Based on Biomimetic Mineralization

Among various drug-delivery systems, core-shell nanoparticles have many advantages. Inspired by nature, biomimetic synthesis has emerged as a new strategy for making core-shell nanoparticles in recent years. Biomimetic mineralization is the process by which living organisms produce minerals based on biomolecule templating that leads to the formation of hierarchically structured organic–inorganic materials. In this minireview, we mainly focus on the synthesis of core-shell nanoparticle drug-delivery systems by biomimetic mineralization. We review various biomimetic mineralization methods for fabricating core-shell nanoparticles including silica-based, calcium-based and other nanoparticles, and their applications in drug delivery. We also summarize strategies for drug loading in the biomolecule-mineralized core-shell NPs. Current challenges and future directions are also discussed.     

机加工孔套管抗挤压强度有限元分析

套管屈服强度直接影响套管抗挤压性能，套管在加工孔过程中可能诱发孔眼附近材料发生金属相变，导致套管屈服强度不再均匀分布，进而影响套管抗挤压强度。在相同工况下，对比了P110完整套管和机加工孔套管的抗挤压强度，以此为参照组分析了相变区域面积和相变区域屈服强度对机加工孔套管抗挤压强度的影响。结果表明，机加工孔会改变材料屈服强度，进而影响套管抗挤压性能。随金属相变区域屈服强度减小，机加工孔套管抗挤压强度减弱；当金属相变区域屈服强度增大时，机加工孔套管抗挤压强度增强。且机加工孔套管相变区域面积对机加工孔套管抗挤压强度的影响随相变区域屈服强度增加而逐渐削弱。     

How to choose endothermic process for thermochemical waste-heat recuperation?

The thermochemical waste-heat recuperation (TCR) systems by steam reforming of various hydrocarbon fuels are considered. A method for determining the TCR systems efficiency is proposed. The methodology is based on the determination of the heat recuperation rate and heat transformation coefficient. TCR due to steam reforming of methanol, ethanol, glycerol, propane, and methane was analyzed. To obtain the initial data for energy analysis of TCR systems, the thermodynamic analysis was performed. With the help of Aspen HYSYS was determined the synthesis gas composition and reaction enthalpy for all investigated variants. The investigation was performed for a wide temperature range from 400 to 1200 K, for the steam-to-fuel ratio of 1, and pressures of 1 bar. It was established that TCR due to the steam reforming of ethanol, glycerol, and propane in the temperature range above 800 K, it is possible to achieve complete recuperation of the exhaust after the furnace. As a results of investigation, the practical recommendations were given for choosing endothermic reaction for the thermochemical waste-heat recuperation systems: in the temperature range up to 600 K for TCR it is necessary to choose a methanol steam reforming reaction; in the temperature range from 600 to 1000 K - the reaction of steam reforming of ethanol and glycerol; in the temperature range above 1000 K - the reaction of steam reforming propane and methane.     

基于萤石溶解/表面转化的含钙矿物表面定向调控浮选技术及机理研究

研究了萤石在白钨矿和方解石表面溶解和转化的可能性, 发现萤石可以在特定的捕收剂体系下作为抑制剂实现含钙矿物的浮选分离。浮选实验结果表明, 萤石作为抑制剂, 在白钨矿和方解石的浮选中, 用量小、作用效果明显; 动电位检测结果证实了萤石能明显降低方解石的动电位, 但对白钨矿基本没有影响; XPS检测结果证明了萤石对方解石的作用主要在于对Ca-O键能的减弱和Ca-F基团的生成, 即在方解石表面生成CaF2膜; AFM检测则可直观观察到方解石表面经过萤石处理之后出现明显的起伏, 印证了离子的侵蚀与CaF₂膜的生成。